DS-SERIES OWNER’S MANUAL
APPENDIX C
70
APPENDIX C
WINDOWS 95
DIAL-UP NETWORKING
TUTORIAL (Cont.)
PROPERTIES
Ø
Highlight the device you have just created.
Ø
Select “File” from the Windows task bar.
Ø
Select “Properties.”
Ø
Select “General.”
Ø
Select “Configure.” Ensure the information is correct.
Ø
Select “Options.” Enable “Bring up Terminal Window after
Dialing.”
Ø
Click “OK.”
Ø
Select “Server Type”.
Ø
In the “Server Type” Menu, select “PPP: Windows 95, Windows NT,
3.5, Internet.”
Ø
In the “Advanced Options;” Enable software compression.
Ø
In the “Allowed Network Protocols;” Enable TCP/IP.
Ø
Click “TCP/IP Settings.” Enable the following settings.
You must
enable Header Compression.
•
Server Assigned IP Address
•
Server Assigned Name Server Address
•
Use IP Header Compression
•
User default gateway on remote network
Ø
Click “OK” three times.
Ø
You should be in the Dial-Up Networking screen.
Ø
Select the device you are adding. The icon for the device you are
dialing appears on the Dial-Up Networking screen.
DIAL-UP NETWORKING
Ø
In the Dial-Up Networking Window, double click the device you are
dialing.
Ø
Click “Connect To.”
Summary of Contents for DS3
