Model # RHSPD-UK
Bayside Furnishings
®
Page 7
Factory No. 10944
Assembly Instructions
10. Proceed to secure the Side Panel (B) to the Desk Top (A) by attaching 2 Metal Connectors (G)
at the joints. As shown. Make sure that the curved plates of Metal Brackets (G) face outward.
Insert four 20 mm Bolts (4) with Lock Washers (5) and Flat Washers (6) through the drilled
holes on each Metal Connector (G) and screw into the threaded inserts. Tighten the bolts with
the provided 4 mm Allen Wrench.
11. Ask for assistance to stand the unit upright and position it at the desired location.
12. Plug six Plastic Caps (11) onto the cams lock holes on the Side Panel (B) and Pedestal Panels
(D) to conceal the Cam Locks. Gently tap the Plastic Caps with a rubber mallet to ensure they
are fully seated. The desk is now ready for use.
A
D
B
D
11
A
D
C
B
A
B
G
4
5
6
4 5
6
