manualshive.com logo in svg

Bayside Furnishings RHSPD-UK, Manual

Share
Download
Bayside Furnishings RHSPD-UK Manual Download Page 1

 

THIS INSTRUCTION BOOKLET CONTAINS

 IMPORTANT

 SAFETY INFORMATION.   

PLEASE READ AND KEEP FOR FUTURE REFERENCE. 

Bayside Furnishings

®

 

 

 

                    Page 1           

 

              Factory No. 10944 

 

 

O'nin

®

 Roast Hazelnut Single Pedestal Desk without Basket 

Model # RHSPD-UK 

 

 
 
 
 
 
 
 
 
 
 
 
 
 

 

 
 
 
 
 
 
 
 
 
 
 
 
 

 

ADULT ASSEMBLY REQUIRED 

 

If you have any questions regarding assembly or if parts are missing, DO NOT return this item to 
the store where it was purchased. Please call our toll-free customer service number and have 
your instructions and parts list ready to provide the model name, part name or factory number: 

 

001-877-494-2536 

(Service valid only in USA)

 

Pacific Standard Time: 8:30 a.m. - 4:30 p.m., Monday to Friday 

Or visit our website 

www.baysidefurnishings.com

 

Or e-mail your request to 

[email protected]

 

 
 
 

LOT NUMBER:      

 

 

DATE PURCHASED:    /  /   

Summary of Contents for RHSPD-UK












Reviews:

No comments

Brands by name

Popular brands

Load more brands