2 Getting started
•
When you charge the battery with your phone switching on, the battery level icon
will appear in the upper right corner of your phone screen. In battery charging, the
horizontal bars of the icon will blink continuously. When the horizontal bars fill up the
whole icon and the icon stops blinking, it indicates that charging is complete.
•
During charging with your phone switched off, a cylinder icon indicating the power level
of the battery will appear on the screen and will blink continuously. When the cylinder is
filled and stops blinking, it indicates that charging is complete.
NoTe:
When the battery power level is very low, the phone makes alert sounds and displays the
corresponding prompt boxes. When the battery power level is too low to support normal
operation of the phone, the phone will switch off automatically.
Before charging the battery with a cable charger, please make sure that the battery has been
properly loaded into your phone.
To ChARGe The bATTeRy:
1.
Plug the charger into the wall plug.
2.
Then plug the charger into the connector of the phone.
3.
When you charge the battery with your phone switched on, the LED on the left side of
phone blinks in red and the battery level icon is displayed as
.
4.
After complete charging, the LED blinks in blue. Please pull the charger plug out of the
wall plug first, and only then pull the charger out of the phone.
loading the sim card
Your SIM card contains information such as phone numbers and contacts. Load your
SIM card before using your phone. To use the SIM card properly, please read the following
instructions carefully:
NoTe:
•
Keep the SIM card out of reach of children.
•
The SIM card and the metal contactors are easily damaged by scratching or bending.
So be careful when you carry, load or remove it.
•
Always disconnect the charger from the phone before loading or removing the
SIM card.
1641 BMob Touch user manual - te11 11
8/13/10 8:55:21 AM