Bayliner 246 Discovery, Owner'S Manual Supplement

Page: 44 / 80

Chapter 6: Plumbing 246 • Owner’s Manual Supplement
38
Seawater Washdown (If Equipped)
•
Pressurize the seawater washdown
system by turning On the seawater
intake pump switch (the battery
switch must also be On).
•
For the location of the seawater
washdown pump switch, see the
Component Locations section in
Chapter 2 of this supplement.
•
Turn Off the seawater washdown
pump switch when you are done
using the system.
FLOODING and SWAMPING HAZARD!
•
NEVER leave your boat unattended while using the seawater washdown system.
•
Any leak or break in this system may allow large amounts of water to flood the bilge, which
could swamp the batteries and the engine, and even sink your boat.
•
Close the intake seacock when leaving your boat unattended for any length of time.
WARNI N G! !
SYSTEM DAMAGE HAZARD!
BEFORE turning On the seawater washdown system, make sure the intake seacock is Open.
CAUTI ON !