Setup and Use
25
Need Help? 0845 600 6030 (UK) / 1 890 920 111 (Ireland)
www.bayerdiabetes.co.uk
Setup and Use
24
Using Mark
er and
Reminder F
eatures
Using Mark
er and
Reminder F
eatures
If you do not want to mark the test result
Remove the used test strip to automatically save the test
result in the meter memory with no markers. This will also
turn the meter off.
If you want to mark the test result
Before you remove your test strip, press
▲
or
▼
to select
the marker you want to set.
The marker will flash.
To mark a result with the
pre-meal marker, press
M
when the flashes.
The
will then flash. This
feature allows you to set a
reminder to remind you to run
a post-meal test.
The reminder is available only
after setting a pre-meal marker.
If you want to set the reminder,
press
M
. The
will appear
and stop flashing.
If you do not want to set the
reminder, press
▲
or
▼
and
the
will disappear. Press
M
to set.
To mark a result with the post-meal marker, press
▲
or
▼
until the flashes. Press
M
to set.
To mark a result with the diary, press
▲
or
▼
until the
flashes. Press
M
to set.
When the reminder sounds,
the meter will automatically
turn on. The reminder will
beep 20 times, and the
display will show the pre-meal
test result you marked when
you set the reminder. Pressing
any button will silence the
reminder.
You can now run another test by placing a test strip in the
test strip port and following the testing instructions (page 7).
When you have completed
this test and the result is
shown on the display, will
flash. To mark this test as a
post-meal result, press
M
. If
you do not want to mark this
test, remove the test strip to
turn the meter off. Dispose of
the used test strip as medical
waste.
If you decide not to test after the reminder sounds, press
any button to turn your meter off.
The meter will only set one reminder at a time. It will
remember the last reminder set.
Using the Reminder Feature
81534497_CntrXT_UG_ENuk_FpBp_v0.indd 24-25
81534497_CntrXT_UG_ENuk_FpBp_v0.indd 24-25
1/25/13 8:13 AM
1/25/13 8:13 AM