Bayer HealthCare BNFMC645-HGB, User Manual, Page: 19 / 45

EN -19-
Replacing The Light LED (if the illumination is via LED strip)
Depending on the model, 1 LED strip in the freezer compartment and 2 or 3 LED strips in the
cooler compartment are used to illuminate the interior of your appliance.
To replace any of the LEDS, please contact
the nearest Authorised Service
.
Note: Numbers and location of LED strips may be changed according to the model.
!!! Some versions may not have freezer illumination.
LED strip lamp
(Freezer Comp.)
(a)
LED strip lamp
(Cooler Comp.)
(b)
LED strip lamp
(Cooler Comp.)
(c)
LED strip lamp
(Cooler Comp.)
PART - 5.
TRANSPORTATION AND CHANGING OF
INSTALLATION POSITION
• The original packaging and foam may be kept for re-transportation (optionally).
• You should fasten your fridge with thick packaging, bands or strong cords and follow the
instructions for transportation on the package for re-transportation.
• Remove movable parts (shelves, accessories,
vegetable bins etc.) or fix them into the fridge
against shocks using bands during re-positioning
and transportation.
Always carry your fridge in the upright position.
Repositioning the door
• It is not possible to change the opening direction of your fridge door, if the door handles
on your fridge are installed from the front surface of the door.
• It is possible to change the opening direction of the door on models without any handles.
• If the door opening direction of your fridge can be changed, you should contact the
nearest Authorised Service to have the opening direction changed.