background image

 

TIPS TO EXTEND THE LIFE OF YOUR BATTERY PACK 

 

 

Recharge the unit or the pack BEFORE it is completely discharged.  Don’t wait until the unit is completely 
discharged to recharge the pack.  Don’t wait until the lamp starts to dim.   

 

Recharge after each use, whether the unit is fully discharged or not. 

 

Don’t store the lamps or battery packs in heat above 110ºF.  It’s best to store them out of the sunlight at room 
temperatures below 82ºF. 

 

Don’t leave the battery packs in the trunk of your car.  It might be too hot or too cold. 

 

Never recharge a hot lamp or battery pack. 

 

Don’t recharge the lamp or battery pack in direct sunlight. 

 

Don’t leave the lamps or battery packs sitting in the trunk of your car in the summer months. 

 

Never allow anything to cover a lamp when it’s on, or a charging platform during recharging. 

 

Do not try to operate in wet or misty conditions. 

 

Do not submerge. 

 

This unit is not for hazardous duty and it isn’t explosion-proof.  Do not operate around flammable liquids or 
explosive environments. 

 
 
 

CONSIDER REPLACING YOUR BATTERY PACK WHEN THE 

GREEN

 LIGHT COMES ON TOO QUICKLY, 

AND/OR THE 

COMPLETELY CHARGED

 LAMP OR BATTERY PACK GIVES YOU LESS THAN 30 MINUTES 

OF FULL BRIGHTNESS (or after between 350 to 500 cycles). 

 

  

 

 

     Battery Type:   

NiMH

 (Nickel Metal Hydride)* 

          

         

 

             Voltage:   

7.2Vdc

 

        

 

 

           Capacity:   

4

,100 mAH

 

    Number cells:   

12 each ‘AA’ size

 

 

             *Nickel Metal Hydride can be disposed of in a municipal solid waste venue. 

WARNINGS: 

 
Pack contains two series 6-packs of 7.2Vdc NiMH batteries in parallel. 
Do not place the pack into a fire or dispose of in a fire. 
Do not recharge in explosive or hazardous areas. 
Do not operate the lamp in explosive or hazardous areas. 
Do not try to penetrate the pack or work on the batteries. 
Only use the Bayco lamp or recharging platform. 
Only use the 2A output wall power supply; DO NOT use any other Bayco power supply or try to use a 
lower output power supply. 
NiMH can be disposed of in normal municipal waste systems. 
Keep away from children. 
 

Note: FLUORESCENT BULBS MUST FULLY HEAT TO ACHIEVE FULL BRIGHTNESS.  

In temperatures below 60

º

F the lamp will take a few minutes to reach full brightness. 

# UVR-9014-18 

 
 

 
 
 
UVR-9014-18  

April,2006 

Reviews: