12
Power On Game:
Locate the 9 balls (part # A5BA8106) from the cardboard box and
roll them up into target area.
The balls should roll smoothly into the right side of alley.
Plug the power cord into a grounded wall socket.
The game is now set up and ready for play!
Pull lever toward you to start game.
Adjust volume level on main board under the left lane cover
if desired.
1908 ALLEY GAME SETUP
Install the front rod by pushing the rod through the gap in
the front vinyl edge. Push it through so the rod protrudes
out the opposite end.
Locate 2 of the black machine Philips screws from hard-
ware kit inside cardboard box.
Part # A5SCPH215 (8-32 X 1” Phillips)
Tighten both sides using the Phillips screwdriver bit.
A5SCPH215
The power switch is cleverly hidden under the left
front edge of alley.
The
O
symbol is off.
Flip this switch to the
I
symbol as shown.
Summary of Contents for Skee Ball 1908 Alley
Page 1: ......
