28
UPDATING SOFTWARE
Software Update Instructions for Quick Drop
It is possible to change software in 2 different locations:
1.) Motherboard Software is a SATA drive
2.) Newgen software is a file to be uploaded via USB thumb drive
Your software update may include only one of t
hese, or both, depending on circumstance.
If you have any questions or need further assistance pl
ease contact Bay Tek Games at 920-822-3951 ext. 1102
Instructions:
1.) Install Motherboard Software - Unplug game from wall, or switch power
strip off inside front door.
Remove old SATA drive located in bottom right corner of motherboard.
Pinch metal tab and pull straight off motherboard.
Gently install new SATA software.
2.) Newgen Software loading -
Note: Game power must remain ON for this procedure.
Make sure game is on and running.
Insert the USB stick into the Newgen Board’s USB socket.
Push the small pushbutton (labeled Boot) to load file.
NOTE:
The file will load quickly; you will notice that the USB stick will flash, and the
game will return to normal operating condition.
Summary of Contents for Quick Drop
Page 1: ...1...
