23
HOW TO: ADJUST BRAKE
Remove the back door of the game and set aside.
Locate the brake on the left side if the wheel.
Using a 3/8” nut driver, adjust the lock nut on the
i-bolt as nessesary. Move in 2-turn increments; the
brake is sensitive and needs very little adjustment
to make a difference.
To tighten the brake, tighten the lock nut by turning
to the right.
To loosen the brake, loosen the lock nut by turning
to the left.
Perform another brake test and check the brake
status. Repeat the previous steps until the brake
calibration status reads GOOD.
Summary of Contents for Jewel Mine
Page 1: ...1...
Page 52: ...52 DECAL DIAGRAM...
