Bay Networks Remote Annex 4000, Hardware Installation Manual

Page: 48 / 162

Remote Annex 4000 Hardware Installation Guide
Chapter 2 Installing the Remote Annex 4000
2-10
2 Loosen the screws that secure the cable retainer and slide the cable
retainer back to allow room for the cable (see
Figure 2-8 ).
Figure 2-8. Moving the Cable Retainer to Make Room for the Cable
3 Attach the PBX end of the fan-out cable to the PBX connector
(see
Figure 2-9 ).
Figure 2-9. Attaching the Cable to the PBX Connector
Cable Retainer
PBX End
of Cable