Bay Networks Remote Annex 2000, Hardware Installation Manual, Page: 95 / 136

4-3 Remote Annex 2000 Hardware Installation Guide
Chapter 4 Troubleshooting Procedures
Normal Mode Error-free Sequences
Table 4-1 summarizes the LED display sequences during error-free
power-up in normal mode. The following subsections describe these
states.
Table 4-1. Normal Mode Error-free LED States
Key:
●
On continuously.
✕
Off.
■
Flashing irregularly.
◆
Flashing regularly (about 1Hz).
Activity N1: Testing
LEDs All front panel LEDs light for a few seconds, then all but the Power
LED turn off, confirming that all LEDs are operational.
Activity Power
green Unit
green Net
green Attn
amber Load
green Active
green
N1: LEDs OK
● ✕ ✕ ✕ ✕ ✕
N2: Hardware OK
● ● ✕ ✕ ✕ ■
N3: Network OK
● ● ● ✕ ✕ ■
N4: Looking for
boot file
● ● ● ✕ ◆ ■
N5: Loading code
● ● ● ✕ ● ■
N6: Running
operational code
● ● ● ✕ ✕ ■