manualshive.com logo in svg

Bay Networks Nautica 250, Installation Manual

Share
Download
Bay Networks Nautica 250 Installation Manual Download Page 18

8

301789-A Rev.00

Nautica 250 Installation Guide

1.

Connect one end of the black ISDN cable (labeled 
119071-A) or the red ISDN cable (labeled 117238) to the 
ISDN port on the back of the Nautica 250. Then, connect 
the other end of the cable to the ISDN wall outlet.

If you are using the Nautica 250 with a U interface, 
instead of the ISDN cables mentioned in point one, you 
may have an RJ-45 to RJ-11 cable (labeled 119068-A). 
Connect the RJ-45 end of this cable into the back of the 
Nautica 250 and the RJ-11 end of the same cable into the 
ISDN wall outlet.

2.

Connect one end of the gray LAN cable (labeled 118314) 
to the LAN port. Then, connect the other end of the cable 
to the Network Interface Card (NIC) on the back of your 
PC.

3.

Connect one telephony device (telephone, facsimile, or 
modem) to each telephone port. If you are in the UK, you 
must use the telephone adapters supplied with your 
Nautica 250. In other countries, you may need to supply 
your own telephone adapters.

4.

Connect the power cable to the port labeled 12v DC. The 
Nautica 250 has no on/off switch; it turns on immediately 
when you plug the power adapter into the power outlet.

5.

The Manager port is used for troubleshooting only. The 
Manager cable is labeled 117239. Connect this cable from 
the NAutica 250 to your PC only if you are an experienced 
user of Nautica products and you want to start a local 
management session with the Bay Command Console 
(BCC

™

).

Warning: 

Disconnect the ISDN cable from the wall outlet 

before connecting it to or disconnecting it from the Nautica 250.

Summary of Contents for Nautica 250

























Reviews:

No comments

Brands by name

Popular brands

Load more brands