Bay Networks 8000 RAC, Installing Manual, Page: 110 / 148

Installing the Model 8000 Remote Access Concentrator
Chapter 4 Troubleshooting Procedures
4-12
Table 4-6. Errors from Last ERPC Layer Invocation
Table 4-7. Errors from Last Read Request
Error Description
H/W errors The RAC sensed a hardware error during message
transmission or reception. This error indicates a fault with
the RAC LAN interface. Use the net command to isolate
the problem (see
net on page 3-19).
Msgs from
wrong host The RAC received a message from an incorrect host. This
indicates that the RAC received, and ignored, an unsolicited
packet.
Rsp T/O’s The RAC never received a correctly formatted response
from the correct host, or any response from any load server
host.
Msgs of
wrong type The correct host sent a message to the RAC, but the
message was not a correctly formatted response to the
transmitted request.
Error Description
Msgs with wrong
size The correct host responded to the read request, but
the data size is incorrect.
ERPC layer errors See Table 4-6 .
Aborts rx’d The host’s BFS transmitted an abort in response to
the RAC’s read request. Run erpcd –D on the host to
obtain more information.