manualshive.com logo in svg

Bay Networks 5399, Configuration Notes, Page: 7 / 50

Share
Download
Bay Networks 5399 Configuration Notes Download Page 7

1

Model 5399 RAC Digital Modem Configuration Notes

Model 5399 RAC Digital Modem

Configuration Notes

T

his document describes parameters used to configure the 5399 

RAC’s digital modems. These parameters are set using “config_bytes” 
entries in the %digital_modem section of the config.annex file. 

Custom Modem Configuration

For normal operation, digital modems do not require custom 
configuration as described here. These configuration instructions are 
provided for users who have a compelling need to alter the digital 
modems’ behavior at a basic level. 

Using the %digital_modem Section

The %digital_modem section of the config.annex file can be used to 
establish user-defined modem types and modify the digital modem 
configuration parameters described in this document. 

An example of the %digital_modem section follows below:

%wan

begin_session credit_card
called_no 103
call_action modem
set type_of_modem credit_card
end_session

%digital_modem

type_of_modem credit_card
config_bytes 16 =15,15,7,7
end

Parameters 26 through 63 are provided for use by qualified modem 
engineers only. Changing these parameters from their default 
settings could cause unexpected negative results, and is 
discouraged. 

Summary of Contents for 5399



















































Reviews:

No comments