9
EN
USER MANUAL
XTA
DISPLAY OVERLAY
DISPLAY SYMBOLS
BATT
Battery indicator. When it’s illuminated, battery should be recharged.
Net
Net weight.
Stable
Stable indicator. When it’s illuminated, the scale is stable.
Zero
Zero indicator. When it’s illuminated, the scale is in zero point.
/Kg or /100g
Kilogram or 100g mode.
SAVE
Save indicator.
CHARGE
Battery charging indicator
CH
Check out indicator
6. OPERATION
INITIAL START-UP
Warm-up time of 15 minutes stabilizes the measured values after switching on.
6.1 POWER ON/OFF
Power switch is located below the right side of the scale. Switch on the scale by pressing on/off. The display is switched on and the
self test is started. If you want to switch off press again the key.
6.2 ZERO
Environmental conditions can lead to the balance exactly zero in spite of the pan not taking any strain. However, you can set the display
of your balance to zero any time by pressing
key and therefore ensure that the weighing starts at zero if the desviation is
inside metrological margins.
6.3 TARE
The weight of any container can be tared by pressing
key, so that with subsequent weighing the net weight of the object being
weighed is always displayed.