EN
EN
USER'S MANUAL
T-TOUCH SERIES
30
4.4 SETTINGS
Note:
1. The settings menu can only be accessed, if you are an administrator or operator who has this permission activated. To access the
metrological parameters, you must press the motherboard calibration push-button before you can access the configuration related to the
approval.
Permission
Operation
Admin
Access to all parameters except the weighing and calibration settings. To access the weighing and calibration
settings, you must press the CAL button.
Operator
Does not have permission for the settings menu. Only sales mode or change of session. Unless we assign him/
her permissions
Note:
the user name and passwords can be changed as often as desired.
To access the metrological configuration, it is necessary to press the CALIBRATION button. The CAL switch is located on the base of the scale.
S70
Switch
calibration
M80
Switch
calibration
Note:
To access metrologically relevant functions or settings, it is necessary to press the calibration key. For this,
it is necessary to break the seal, thus losing any verification.