Baxton Studio Grover NAB-003-Cherry/White Assembly Instructions Download Page 3

Page: 3 / 4

×3

Tighten the leg (15) clockwise direction.

Attach pieces 10, 12 & 13 using screws (C). Make sure that the

built-in ridge is facing inwards and at the bottom.

Slot piece 14 into the ridges. First insert the cam locks (B) into the

pre-drilled holes on parts 12 & 13. Then insert cam dowels(A) into

each side, you then need to line up these screws with the pre-drilled

holes on the front piece (11). Once attached, tighten the cam locks (B)

using a cross-head screwdriver and ensure the piece is secure.

Turn the drawer upside down. Line up the holes on the outside

pieces with the holes on the runners (GDR &GDL), secure to the

drawer using screws (D).

Summary of Contents for Grover NAB-003-Cherry/White

Page 1: ... 2 PCS 2 PCS 2 PCS L D R D CR CL 1 2 3 3 4 D D D D D D D 1 2 3 3 8 11 4 4 5 8 9 10 11 11 12 13 14 15 9 7 6 6 GCL GCL GCL GCR GCR GCR Attach the runners G to pieces 3 and 4 as shown Use screws D On piece 8 attach metal plate K using screw D put the bar hinges E as shown On piece 11 attach the door handles L using screws D ...

Page 2: ...o pieces 1 as shown Use screws D Then put push system I on the base Attach pieces 2 3 and 4 to piece 1 using wooden dowel F cam dowels A and cam locks B make sure that the built in ridge is facing inwards Slot piece 9 into the ridges then attach piece 7 using wooden dowels F screws C connect door 8 using bar hinges E Attach piece 6 to piece 7 using screw M as shown ...

Page 4: ... 11 1 1 2 Turn the unit upside down insert the drawers Put shelf support H into the hole on piece 2 4 put the piece 5 on the shelf support Attach strip O using screw N Secure the unit to a wall in your chosen location using wall plugs P and screw C ...