Baxton Studio FREDA DAYBED-F Assembly Instruction Download Page 2

Page: 2 / 2

STEP 3

STEP 4

STEP 5

Please do not tighten the hardware until the entire assembly is completed.

Secure 2 Support Leg (9) to the Center Support (8) as shown on step 3.1. Tighten the

Support Leg (9) clockwise until secure. Insert the pre-set metal on Center Support (8) to the

metal bracket on each side of Side Panel (2) & (3) as step 3.2. Then securing the metal

bracket as shown in step 3.3 with 1 Screw (F) each side using

Phillips Head Screwdriver (NOT INCLUDED)

Tighten All Bolts from step 1 to step 3 by using L-key (G) & (H) that has been provided.

Attached slat (7) to Front Side Rail (4) & Back Side Rail (5) by unrolling and securing

with 6 Screw (F) per set. Securing Slat (7) to Back Side Rail (5) with 2 Screw (F) as step

4.1. Following by step 4.2, using 1 Screw (F) to secure Slat (7) to Front Side Rail (4).

Repeat the same step to attach another set of slat (7).

ASSEMBLY

COMPLETE

STEP 4.2

STEP 4.1

STEP 3.2

STEP 3.3

STEP 3.1

Summary of Contents for FREDA DAYBED-F

Page 1: ...PCS 4PCS Begin assembly by attaching each Leg 6 to the bottom of the Side Panel 2 3 securing with 2 Allen Bolt C per panel using L key G Then attach the Back Side Rail 5 to the Side Panel 2 3 by align...

Page 2: ...shown in step 3 3 with 1 Screw F each side using Phillips Head Screwdriver NOT INCLUDED Tighten All Bolts from step 1 to step 3 by using L key G H that has been provided Attached slat 7 to Front Side...