baxter ExactaMix 2400 Compounder Operator'S Manual Download Page 38

Page: 38 / 225

Starting Up, Logging In and Out, and Shutting Down

Operator Manual for the Baxter ExactaMix 2400 Compounder

Page 30

53007410 Rev. C

STARTING UP, LOGGING IN AND OUT, AND SHUTTING DOWN

STARTING UP AND LOGGING IN

On the main module, press and hold the power button until the power light illuminates.

Power light and power button

If the software does not start automatically, double-tap the

Exacta-Mix 2400

icon on

the Windows® desktop.

Tip!

Baxter recommends setting the software to start automatically. Contact Baxter

Technical Services for assistance with setting up this feature. Refer to Getting Help on

Page 22.

Icon

If the

Login

window appears:

Enter a

Login

name.

Enter a

Password

. (

NOTE:

Passwords are case-sensitive)

Tap

Log In

Login window

Power light

Power button

Summary of Contents for ExactaMix 2400 Compounder


































































































































































































































Search results

Summary of Contents for ExactaMix 2400 Compounder

Reviews:

baxter ExactaMix 2400 Compounder, Operator'S Manual, Page: 38 / 225

Search results

Summary of Contents for ExactaMix 2400 Compounder

Reviews: