manualshive.com logo in svg

baxter Colleague 3 CXE, Operator'S Manual

The Operator's Manual for the innovative Baxter Colleague 3 CXE can be easily accessed and downloaded for free from manualshive.com. This comprehensive manual provides detailed instructions and essential information, ensuring users maximize the potential of their Baxter Colleague 3 CXE. Experience seamless downloading and step-by-step guidance with our user-friendly manual.

Share
Download
background image

2

Infusion Modes

2-20

COLLEAGUE CXE VOLUMETRIC INFUSION PUMP OPERATOR’S MANUAL

071960491

Rate-Volume Infusions

This mode allows programming the flow rate and the infusion volume, 
and the pump then runs at the programmed rate until the programmed 
volume has been delivered. The pump then switches to the KVO (Keep 
Vein Open) rate.

Rate-volume infusions can be programmed for primary or secondary 
infusions. Secondary rate-volume infusions can be programmed without 
stopping the primary infusion.

For instructions on programming rate-volume infusions, see 
“Programming a Primary Rate-Volume Infusion,” 4-21 and 
“Programming a Secondary Rate-Volume Infusion,” 4-46.

Volume-Time Infusions

This infusion mode lets the user enter the Volume to be Infused and 
Time Duration, and the pump then calculates and displays the flow rate.

This feature is available in primary and secondary modes. Secondary 
infusions can be programmed in Volume-Time without stopping the 
primary infusion.

For instructions on programming Volume-Time infusions, see 
“Programming a Primary Volume-Time Infusion,” 4-25 and 
“Programming a Secondary Volume-Time Infusion,” 4-49.

COLLEAGUE GUARDIAN Feature

The COLLEAGUE GUARDIAN feature is a configurable option that 
helps to reduce the potential for medication programming errors by 
allowing program limits to be predefined for labels in the pump's label 
library, including custom labels, based on facility or care area protocols.

The COLLEAGUE GUARDIAN feature allows the clinician to 
compare pump programming with facility-defined dose guidelines at the 
point of care. If the clinician programs values outside of the rule sets the 
facility has programmed for a label, an out of limits warning occurs. The 
COLLEAGUE GUARDIAN feature can be configured for rate-volume 
and dose mode programming.

Note:

All of the setup required to use the COLLEAGUE GUARDIAN 

feature must be completed by facility-authorized personnel 

according to the instructions in the 

COLLEAGUE Pump 

Configuration Manual 

or the instructions accompanying the 

COLLEAGUE GUARDIAN Configuration Tool.

Summary of Contents for Colleague 3 CXE







































































































































































































































Reviews:

No comments

Related manuals for Colleague 3 CXE

DAB BHP Instruction For Installation And Maintenance preview
BHP
Brand: DAB Pages: 39
Laars LT Series Installation And Operation Instruction Manual preview
LT Series
Brand: Laars Pages: 68
Daikin Altherma 3 R F+W Operation Manual preview
Altherma 3 R F+W
Brand: Daikin Pages: 20
Rheem RTEC-04 E03 Operation And Installation Instructions Manual preview
RTEC-04 E03
Brand: Rheem Pages: 15
Xylem Goulds CentriPro M05411 Instruction Manual preview
Goulds CentriPro M05411
Brand: Xylem Pages: 68
PVI Industries TURBOPOWER 1000 P 225A-TPL Specification preview
TURBOPOWER 1000 P 225A-TPL
Brand: PVI Industries Pages: 1
vacuubrand MD 4C NT Instructions For Use Manual preview
MD 4C NT
Brand: vacuubrand Pages: 80
DAB E SYBOX MINI Assembly And Dismantling Manual preview
E SYBOX MINI
Brand: DAB Pages: 41
XTline XT122110 User Manual preview
XT122110
Brand: XTline Pages: 29
Regulus CTC EcoPart 400 Installation And Maintenance Manual preview
CTC EcoPart 400
Brand: Regulus Pages: 26
Dimplex A Class User Manual preview
A Class
Brand: Dimplex Pages: 12
SAMES KREMLIN FLOWMAX PU 2125 F Documentation preview
FLOWMAX PU 2125 F
Brand: SAMES KREMLIN Pages: 32
UDOR ZETA Series Assembly Instructions Manual preview
ZETA Series
Brand: UDOR Pages: 96
GORMAN-RUPP PUMPS S4A1-E25 460/3 Installation, Operation And Maintenance Manual preview
S4A1-E25 460/3
Brand: GORMAN-RUPP PUMPS Pages: 52
SAMES KREMLIN REXSON 2B453 User Manual preview
REXSON 2B453
Brand: SAMES KREMLIN Pages: 49
Barnstead|Thermolyne NANOpure DIamond D11931 Operation Manual preview
NANOpure DIamond D11931
Brand: Barnstead|Thermolyne Pages: 56
Idex Warren Rupp DMF2 Service & Operating Manual preview
Warren Rupp DMF2
Brand: Idex Pages: 20
OmarLift HI Operating Instructions Manual preview
HI
Brand: OmarLift Pages: 32

Brands by name

Popular brands

Load more brands