baxter Colleague 3 CXE, Operator'S Manual

Page: 31 / 230

071960491 COLLEAGUE CXE VOLUMETRIC INFUSION PUMP OPERATOR’S MANUAL
2-7
Description
Description of Controls and Indicators
• When there is no administration set in the pump, pressing this key opens the loading
mechanism so that the administration set can be loaded.
• When there is an administration set in the pump, pressing this key opens the loading
mechanism so that the administration set can be removed.
When the pump channel is running, pressing the STOP key for that channel stops the
infusion.
Fluid Flow Symbol Description
This fluid container symbol located below the left side of the tubing channel indicates
the upstream side of the pump. When loading the administration set, always ensure
that the tubing from the container enters the left side of the pump.
This patient symbol below the right side of the tubing channel indicates the
downstream side of the pump. When loading the administration set, always ensure that
the tubing from the pump to the patient exits right side of the pump.
These arrows indicate the direction of fluid flow while the pump is running.
LEDs Description
RUNNING LED
This green LED remains on continuously during an infusion.
ALERT LED
This yellow LED remains on continuously during an alert condition, if there are no
active alarms.
ALARM LED
This red LED flashes on and off during an alarm condition and remains on
continuously during a failure condition.
CHANNEL SELECT LED
Triple channel pumps only. This LED is lit when the associated pump channel is
selected.
Table 2-2 Pump Module Controls and Indicators — continued
Fluid Flow to Patient