baxter Colleague 3 CXE, Operator'S Manual

Page: 15 / 230

071960491 COLLEAGUE CXE VOLUMETRIC INFUSION PUMP OPERATOR’S MANUAL
1-3
Introduction
Safety Summary
The pump has a flexible graphical interface that can be used to configure
the available features. As many as eight custom PERSONALITY feature
sets can be created by selecting the operating functions which are
needed to meet the needs of an individual care area or for specific
therapies. This flexible platform allows the pump to be used for simple
infusions and/or therapies requiring complex dose calculations. See
“Technical Specifications,” 9-1 for configurable features and default
settings.
Although the pump has been designed and manufactured to exacting
specifications, it is not intended to replace trained personnel in the
monitoring of infusions.
Safety Summary
Standards
In accordance with UL 60601-1 and CAN/CSA C22.2 No. 601.1, this
pump is classified as:
„
Class 1
„
Type CF
„
Drip-proof (IPX1)
„
Not suitable for use with flammable anesthetic mixtures with air,
oxygen or nitrous oxide
„
Continuous operation
This manual has been developed with consideration to the requirements
in the International Standard, IEC 60601-2-24: 1998, Medical Electrical
Equipment — Part 2-24: Particular Requirements for Safety of Infusion
Pumps and Controllers. Data presented in the Technical Specifications
reflect specific test conditions defined in this standard. Other external
factors such as varying back pressure, temperature, head height, set
usage, fluid restrictions, solution viscosity, or combinations of these
factors, may result in deviations from the performance data enclosed.
When disposing of this device, its batteries, or the administration sets
designed for use with the device, follow local regulations and
guidelines.
Note: Outside the U.S., read document DIN VDE 0753-5, Rules of
application for parallel infusion; conceivable methods for use,
when performing parallel infusions.