baxter Colleague 3 CXE, Operator'S Manual

Page: 130 / 230

4
Managing Occlusion Settings
4-76
COLLEAGUE CXE VOLUMETRIC INFUSION PUMP OPERATOR’S MANUAL 071960491
If enabled, the
Downstream Occlusion Values
pop-up is displayed
(Figure 4-106). Downstream occlusion pressure alarm points for specific
rate ranges are displayed, and the present setting is highlighted.
3.
To display values in mmHg, press the
psig/mmHg
soft key. Press
this key again to return the values to psig.
4.
The occlusion values can be modified by using the
×Ø
keys to
highlight the new value range, then press the
Select
soft key to
choose the selection.
5.
To exit the Options Menu, press the
Done
soft key, or the
Main
Display
key to return to the Main Display Screen.
If the Options Menu is used to modify the Downstream Occlusion
values, the override values are not permanently saved. When the pump
is powered off, the downstream occlusion values revert to the
configuration defined by the facility.
Auto Restart
When configured by facility-authorized personnel, the Auto Restart
option enables the pump to automatically restart itself when a
downstream occlusion has been corrected within approximately one
minute after detection. Each pump channel will continue to restart for up
to nine occurrences (or as configured) before manual intervention is
required.
Selecting different downstream occlusion alarm values does not affect
the Auto Restart feature.
Pressing any key during a Downstream Occlusion alarm disables Auto
Restart.
Figure 4-106 Downstream
Occlusion Values Pop-up