6. Installer Information
6.1 Installer menu
19
EcoBlue Accessories
7212552
DIGI CLOCK:
Shows the current time (hours/minutes) in a digital and analogue clock format.
Setting possibilities:
NO: Digital clock not shown (Default value).
YES: Digital clock shown. If digital clock is set YES, you can choose between 12 HRS (AM-PM) or
24 HRS format.
BACKLIGHT:
Setting possibilities:
PERMANENT ON: Backlight always ON.
PERMANENT OFF: Backlight always OFF.
BUTTON PRESSED: Backlight ON when any pushbutton is pressed. Backlight goes OFF 20
seconds after the last button press (Default value).
S/W CHANGE:
Automatic Summer/Winter time change. Summer time starts on the last Sunday of
March (1:00 am to 2:00 am) and ends on last Sunday of October (2:00am to 1:00am), then Winter
time starts.
Setting possibilities:
ON:
S/W time change will be done automatically (Default).
OFF:
S/W time change must be done manually.
PROG TYPE:
Menu to select daily, week-weekend, weekly programming. This value will be applied
to both central heating and domestic hot water programming method.
Setting possibilities:
Daily:
All days (Monday - Sunday) are programmed with the same ON/OFF time schedule.
Weekly:
You can program each day (Monday, Tuesday, ...) with a different ON/OFF time schedule
5-2:
You can program Monday - Friday with a ON/OFF time schedule and Saturday - Sunday with
a different one.
NR PERIODS:
The number of adjustable time periods defined by ON-OFF pairs to control central
heating or domestic hot water.
Setting possibilities:
3 ON-OFF: adjust maximum 3 ON-OFF time periods (Default value).
2 ON-OFF: adjust maximum of 2 ON-OFF time periods.
DEFAULT PRGS:
Time programme that will appear by default when running in AUTO mode or as
base point to customize according to users lifestyle.
Setting possibilities:
STD
HOME
ECO
For detailed explanation of the profiles, see Section 4.1 “Running a default programme”
PUMP GRAVITY: Fully pumped systems (PUMPED)
(Default value):
Central heating (CH) and domestic hot water (DHW) channels run independently.
Gravity systems (GRAVITY):
Domestic hot water (DHW) is ON every time that Central heating (CH) is on.
RESET:
Reset all parameters of installation menu to factory default.
To leave the installer’s menu press the + key.
