13 Appendix
13.1 EC Declaration of Conformity
The unit complies with the standard type described in the EC declaration
of conformity. It has been manufactured and commissioned in accordance
with European directives.
The original declaration of conformity is available from the manufacturer.
13.2 Checklist for commissioning
Tab.31 Appliance concerned
Description of the appliance
Please fill in
Range
Model
Software version
Tab.32 General checks
Inspection points
Checked?
Position of the outdoor unit, distance from the wall
Circulation direction of the refrigerant fluids
Tightness of the refrigerant fittings
Pressure during evacuation prior to filling
Evacuation time and outside temperature during evacuation
Tab.33 Electrical checks
Inspection points
Checked?
Presence of the recommended circuit breaker (curve D)
Tightened terminal blocks
Separation of the power and low voltage cables
Mounting and positioning of the sensors
Tab.34 Points to check after commissioning
Inspection points
Checked?
Check the tightness of the connections
Check the water pressure
No faults on the regulator
Check the temperature on the domestic hot water temperature sensor to ensure that the
appliance is working correctly.
If the readout values are incorrect, check the positioning of the sensor in the sensor tube
Compressor start-up
Transfer of heat to the domestic hot water tank
Back-up heating working
Instruct the user in how the product operates
13 Appendix
74
SPC Split
7740321 - v04 - 03122019
