Baxi SCB-17, User And Installation Manual

Page: 12 / 304

12
4 Settings
4.1 Introduction to parameter codes
The controls platform makes use of an advanced system to
categorise parameters, measurements and counters. Knowing the
logic behind these codes, makes it easier to identify them. The code
consists of two letters and three numbers.
First letter
C
P010
The first letter is the category the code relates to.
A Appliance: Appliance
C Circuit: Zone
Second letter
C P 010
The second letter is the type.
P
Parameter: Parameters
C Counter: Counters
M Measurement: Signals
Number
CP 010
The number is always three digits. In certain cases, the last of the
three digits relates to a zone.
4.2 Access to parameters
To access to SCB-17 parameters, it is possible to use the boiler control panel (refer to boiler instruction manuals ) or service
tool. Below some examples :
Control panel MK3
•
Press menu button and enable installer access selecting
“installer access”
and entering the code 0012. To change
the number, rotate the knob and push the confirmation button.
• Select the zone to be modified (tile in the main screen)
• Select the parameter zone to change, then scroll down the zone setup menu till the voice
“Paramet ers, counters,
signals”
and push the confirmation button.
In alternative it is possible to search the single parameter pushing the menu button
→
“Installation setup”
→
“Search
datapoint” . Write the friendly name and press enter.
The control panel shows all possible parameters with the same name. They can be more than one because of different
devices connected.