Fit the new bulb.
!
Fit the new bulb by screwing it
clockwise (See figure 5).
!
Relocate the fuel effect.
!
Relocate the black metal strip. The
folded edge should be on the bottom.
!
Secure using the three screws
removed previously.
2. My stove is switched on but there
is no light, fan or heat.
The first thing to do is check the wall
socket. To do this plug in a known
working appliance. If the appliance you
have plugged in works then there is a
good chance that the problem lies with the 13 Amp fuse in the stove plug. If either fuse
or socket is suspected, have them checked by an electrician.
3. My stove is on but there is no heat.
!
Check that the thermostat on the stove is set above ambient room temperature.
!
Alternatively a cut out device is fitted to the stove to prevent damage due to over
heating. If it operates due to an obstruction in the airflow, the stove must be turned off
and allowed to cool for 15 minutes and the obstruction removed before restarting.
4. I Have a problem that is different to those in the previous examples 1- 3.
Below is a list of Useful Telephone numbers
For general advice about your stove:
BAXI FIRES DIVISION TECHNICAL HELPLINE 08706 061 065.
To report faults or arrange for your stove to be serviced:
BAXI FIRES DIVISION SERVICE 08706 090 081.
For sales or product information:
BAXI FIRES DIVISION SALES 08706 061 067.
CALLERS IN THE REPUBLIC OF IRELAND
Call 0044 8706 061 065
Page 9
INSTALLER AND OWNER GUIDE
©
Baxi Heating U.K. Limited 2006.
Figure 5. Bulb replacement
