14
We recommend that the installer performs a leak test on the mains water
circuit and on the drain water circuit to ensure the integrity of the inlet and
outlet connections.
Install the shower tray and the shower
waste trap
.
Draw_16
WEIGHT:
A3
SHEET 1 OF 1
SCALE:1:10
DWG NO.
TITLE:
REVISION
DO NOT SCALE DRAWING
MATERIAL:
DATE
SIGNATURE
NAME
DEBUR AND
BREAK SHARP
EDGES
FINISH:
UNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN MILLIMETERS
SURFACE FINISH:
TOLERANCES:
LINEAR:
ANGULAR:
Q.A
MFG
APPV'D
CHK'D
DRAWN
5. MAINTENANCE
•
Installed with cold inlet pressure above 6 bar.
•
Use of the system without a
waste
trap.
•
Inadequate cleaning of the
waste
trap.
•
Installation of the
Assure Horizontal
SHRU not in accordance
with
these instructions..
•
Unauthorized repairs and modifications.
7
8
The Assure
Horizontal SHRU has been designed to require minimal maintenance other than
regular cleaning of traps and filters removing all hair and dirt, thus preventing blockages.
To maintain efficiency it is recommend you periodically dissolve soap residue on the inside
copper pipe with your usual drain cleaner and/or to clean the unit with a pipe cleaning brush
and hot water
6. WARRANTY
The Assure Horizontal SHRU warranty is valid for 2 years after the installation date.
During the warranty period
if the
p
roduct has a defect in design, material or workmanship
it
should be returned to the place of purchase
.
The warranty will be invalidated if product failures are caused by the following:
T
o assist with maintenance it is strongly recommended to install a waste trap before the Assure SHRU
to prevent the ingress of material that may diminish the effectiveness of the unit.
