Install the 6 loose pebbles as
follows. The underside of each
pebble is marked with a letter ‘A’ to
‘F’ and an arrow.
2.
The pebbles should be positioned
so that the arrows always point
towards the back of the fireplace
opening. When located into position
the stem of each arrow should be at
90° to the rear of the fireplace
opening (See figure 12).
3.
Hold pebble ‘A’ upright with the
arrow pointing to the top. Place
pebble “A” on top of the base
pebble (See figure 12).
4.
Hold pebble ‘B’ upright with
the arrow pointing to the top.
Place pebble “B” on top of the
base pebble. (See figure 13).
5.
Hold pebble ‘C’ upright with
the arrow pointing to the top. Place
pebble “C” on top of the base pebble
(See figure 14).
6.
Hold pebble ‘D’ upright with the
arrow pointing to the top. Place
pebble “D” on top of the base
pebble (See figure 15).
Page 13
OWNER GUIDE
Figure 15.
Figure 14.
Figure 13.
Figure 12.
