Never cover the heater or obstruct the opening at the base of the heater,
this could cause overheating and consequent risk of fire.
The appliance can be controlled by the controls mounted on the heater, or using
the remote control handset.
Heater Controls
The following switches are located under the controls cover, on top of the
heater.
Thermostat Control
- Adjust to maintain room temperature (cycles between
900 and 1800W)
Flame Dimmer Control
- Adjust to set flame intensity
ON/OFF
- Switches on FAN for cool air
900W/1800W
-
Press once for Low heat setting
Press twice for High heat setting
Heater will only work if ON/ OFF button has first been
pressed and if the thermostat is set above ambient
room temperature. Switch off by pressing the
ON/OFF button
LAMP
-
Switches flame/fuel effect on and off
TIMER
Press the timer button to set the heater or fan to run
for a period of between a half-hour (0.5) and 7hours.
The setting can be increased in 0.5H increments by
repeatedly pressing the TIMER button. The indicator
lights will shows the time set.
Situated at the front of the stove is a row of lights, which indicate the stove
functions
Operation
Flame Dimmer
Control
Thermostat
Control
Control
Panel
Tell Tale Panel
FAN 900W 900W LAMP 0.5H 1H 2H 4H
.
FAN 900W 900W LAMP O.5H 1H 2H 4H
ON/OFF 900/1800W LAMP TIMER
Function
Buttons
Indicator
Lights
4
Infra Red Sensor for
Remote Control
-
