Bavsound Stage One Speaker Upgrade Installation Instructions Manual Download Page 1

Stage One Speaker Upgrade 

Installation Instructions for BMW
3 Series / M3 Convertible 
’00-’06 (E46)

 

Want an easier Install?  Watch our 

videos first!  

This is a supplement for the installation videos that you will find on our website 

(

www.bavsound.com

). Head to “Help > Installation Info.” 

There are details we go over in the installation videos that cannot possibly be covered as 

effectively through the written word. This guide is meant to help you in the garage. We still 

suggest taking your computer/tablet/phone to the car with you and streaming the videos to 

make sure everything goes off without a hitch. Now, let’s get started!

What you’ll need to complete the installation:

BAVSOUND Tool Kit 

(or some variety thereof - the video highlights the tools needed 

for this particular installation) - 

http://www.bavsound.com/product/414/361/

BAVSOUND-Interior-Disassembly-Tool-Kit/

• Optional: 

Heat gun or hair dryer 

(to dry your hair... Only kidding! -- to heat up sound 

deadening for better pliability)

Tunes in the garage

 (your choice)

www.bavsound.com

 1

Summary of Contents for Stage One Speaker Upgrade
















Reviews: