2
BavSonic
E&M Telephone Audio Features
The BavSonic
E&M telephone intercom interface module connects the intercom system of the
drive-thru pharmacy lane to the telephone system. This is a full duplex audio system for
maximum intelligibility. The incoming and outgoing audio levels are adjustable inside the
interface.
The customers at the remote-drive-thru locations can call the pharmacy by depressing the CALL
BUTTON on either lane. This initiates a call to the telephones in the pharmacy that are
programmed to receive them. The pharmacy employees can access each remote lane from the
telephones that are given access. If a customer presses the call button, and the call is not
answered in approximately one minute, the call is terminated for 10 seconds then another attempt
is made. This will happen five times at which point the interface will reset itself awaiting the
next activation of the call button.
Telephone Interface
Power is supplied to the interface through an 110v power cord and is protected by a non-
replaceable 1 amp fuse. The customer will supply the 110v power outlet as well as the
connections from the telephone system to an area under the counter adjacent to the drive-thru
window.
Telephone system requires an E&M port for each lane, and the phone system to be programmed
to connect to the interface. This also is the customer’s responsibility.
These items should be in place, and the phone system programed, before installing the
BavSonic
TM
E&M Telephone Interface.
