Having installed the quick release bolts, we can now install the enclosure. To do this, it helps to have a friend
handy, although it isn’t completely necessary. You’ll want to lie down in the trunk with the enclosure resting
on top of you.
1.
Lift the front of the enclosure (side with BSW logo on it) up and slide the front brackets into the holes
closest to the rear of the car.
2.
With the brackets inserted into the holes, you can lift the rear of the enclosure up, being sure to align
the holes in the brackets with the bolts that you dropped down into the I-Beam.
3.
Using a small pair of needle nose pliers to hold the bolt steady, install the second washer up onto the
bolt.
4.
Now, slide the lock washer and quick release knob up onto the bolt and tighten down securely. Repeat
for both sides.
6 of 8
Any reproduction, distribution, modification, or dissemination of these instructions without written permission from Bavarian Soundwerks is
expressly forbidden and a violation of international copyright law. Any violation will result in persecution to the full extent available under the
law!
© 2006 Bavarian Soundwerks, LLC.
2195 Defoor Hills Rd., Suite D, Atlanta, GA 30318
P: 404.963.8857 |
www.bavsound.com