background image

be in motion

be in motion   

All data/information and particulars given in this brochure is non-binding customer information, subject to constant further development and continuously updated by our permanent  
alteration service. Please note that all particulars/figures/information is current data at the date of printing. These particulars are not legally binding for the purpose of measurement,  
calculation or cost accounting. Prior to using any of the information contained in this brochure as a basis for your own calculations and/or applications, please inform yourself about  
whether the information you have at your disposal is up to date. Therefore, no liability is assumed for the correctness of the information.

Responsible for content: 

Baumüller Nürnberg GmbH

   Ostendstraße 80–90   90482 Nürnberg   T: +49 (0) 911 5432 - 0   F: +49 (0) 911 5432 - 130   

www.baumueller.com 

Baumüller Anlagen-Systemtechnik GmbH & Co. KG

   Ostendstraße 84   90482 Nürnberg   T: +49 (0)  911 54408 - 0   F: +49 (0) 911 54408 - 769 

Baumüller Reparaturwerk GmbH & Co. KG

   Andernacher Straße 19   90411 Nürnberg   T: +49 (0) 911 9552 - 0   F: +49 (0) 911 9552 - 999 

Baumüller DirectMotion GmbH

   Flugplatzweg 2   37581 Bad Gandersheim   T: +49 (0) 5382 9805- 0   F: +49 (0) 5382 9805 - 55 

3.229.en.11/16

11/16

Headquarters

Baumüller Nürnberg GmbH

Ostendstraße 80-90, 90482 Nürnberg  
T:  +49 (0) 911  5432 - 0,  F:  +49 (0) 911  5432 - 130

www.baumueller.com

Baumüller Anlagen-Systemtechnik GmbH & Co. KG

Ostendstraße 84, 90482 Nürnberg 
T:  +49 (0) 911  54408 - 0,  F:  +49 (0) 911  54408 - 769

www.baumueller.com

Baumüller Reparaturwerk GmbH & Co. KG

Andernacher Straße 19, 90411 Nürnberg 
T:  +49 (0) 911  9552 - 0,  F:  +49 (0) 911  9552 - 999

www.baumueller-services.com

Baumüller DirectMotion GmbH

Flugplatzweg 2, 37581 Bad Gandersheim 
T:  +49  (0) 5382  9805 - 0,  F:  +49  (0) 5382  9805 - 55 

www.baumueller.com 
 
Nürmont Installations GmbH & Co. KG 

Am Keuper 14, 90475 Nürnberg 
T:  +49 (0) 9128  9255 - 0,  F:  +49 (0) 9128  9255 - 333 

www.nuermont.com

Argentina

Mektron ID S.R.L. 
José Bonifacio 234, C1424CHF, C.A.B.A,  
Buenos Aires 
T: +54 011 4922 4086; T/F: +54 011 2075 7048

Australia

Baumüller Australia Pty. Ltd. 
19 Baker Street, Botany NSW 2019, Sydney 
T: +61 2 83350 - 100, F: +61 2 83350 - 169

Austria 

Baumüller Austria GmbH 
Schärdinger Straße 13, 4061 Pasching 
T: +43 (0) 7229 22822-0, F: +43 (0) 7229 22822-32

Brazil

Baumüller Automação (Sales)
R. Padre Guilherme Pompeu, 1, Centro
06501-055 Santana de Parnaíba S.P.
T: +55-11-4115-8277, M: +55-11-98277-4445

Brazil

NC Motores (Service)
R. Iguassú, 42, Vila São Silvestre
CEP 06417-140 - Baruerí S.P. 
T: +55-11-4168-4130, F: +55-11-4168-4144

Canada 

Baumueller Canada
6581 Kitimat Road, Unit 8
Mississauga, ON L5N 4J4, Canada
T: +1 905-228-1096, F: +1 905-247-0609

China

Baumueller Automation Equipment Trading 
(Shanghai) Co., Ltd. 
Floor 2nd No. 29 Lane 2777 Jinxiu East Rd  
Pudong New Zone Shanghai, China 201206  
T: + 86 21 5031 0336, F: + 86 21 5031 6106

China

Baumueller Automation (Suzhou) Co., Ltd. 
08/D01, No. 1801 Pangjin Road, Wujiang  
Economic and Technological Development Zone,  
215200 Jiangsu  
T: +86 512 6319 3298, F: +86 512 6319 3318

China 

Beijing Go-Well Electrical Technology Co. Ltd. 
Room 1001, No.7, Huaqing Business Building, 
Huaqing Garden, Wudaokou, Haidian District, 
100083 Beijing 
T: +86(0)  10 8286 7930-856, F: +86(0)  10 8286 7987

France

 

Baumüller SARL 
Parc Saint Exupéry 6 bis, rue Maryse Bastié,  
69500 Bron  
T: +33 (0) 4 3724 0900, F: +33 (0) 4 7826 3420

Germany 

Sales office Dresden

 

Baumüller Nürnberg GmbH

 

Fritz-Reuter-Str. 34a, 01097 Dresden  
T: +49 (0) 911 5432-517, F: +49 (0) 911 5432-99518

Germany 

Sales office Griesheim

Baumüller Nürnberg GmbH

 

Waldstraße 1, 64347 Griesheim 
T:  +49 (0) 6155  8430 - 0,  F:  +49 (0) 6155  8430 - 20

Germany 

Sales office Langenhagen

 

Baumüller Nürnberg GmbH

 

Bohlenweg 10, 30853 Langenhagen 
T:  +49 (0) 511  771  968 - 0,  F:  +49 (0) 511  771  968 - 77

Germany 
Sales office Nürnberg 

Baumüller Nürnberg GmbH 
Ostendstraße 80-90, 90482 Nürnberg 
T: +49(0)911 5432-501, F: +49(0)911 5432-510

Germany 

Sales office Velbert

 

Baumüller Nürnberg GmbH

 

Sontumer Str. 18, 42551 Velbert 
T:  +49 (0) 2051  80858 - 0    F:  +49(0)2051  80858 - 15

Germany - Appen

Nürmont Installations GmbH & Co. KG 
Hasenkamp 34, 25482 Appen 
T: +49 (0) 4101 37707-0, F: +49 (0) 4101 37707-29

Germany - Freiberg

Nürmont Installations GmbH & Co. KG 
Am Junger Löwe Schacht 11, 09599 Freiberg 
T:  +49 (0) 3731  3084 - 0,  F:  +49 (0) 3731  3084 - 33

Germany - Kamenz

Baumüller Reparaturwerk GmbH & Co. KG 
Nordstraße 57, 01917 Kamenz 
T:  +49 (0) 3578  3406 - 15,  F:  +49 (0) 3578  3406 - 50

Germany - München

Baumüller Reparaturwerk GmbH & Co. KG 
Meglingerstraße 58, 81477 München 
T:  +49 (0) 89  748  898 - 0,  F:  +49 (0) 89  748  898 - 55

Great Britain 

Baumüller (UK) Ltd. 
Unit 9 Rugby Park, Bletchley Road 
Heaton Mersey Industrial Estate 
Heaton Mersey, Stockport SK4 3EJ 
T:  +44 (0) 1614  3278 - 24,  F:  +44 (0) 1614  3284 - 93

Indien 

Baumüller India Pvt. Ltd. 
„Kavi“ - Survey-94/7, Plot-38, Paud Road,  
Bhusari Colony, Kothrud, 411038 Pune  
T: +91 20 401603 33, F: +91 20 254241 79

Indien  

NÜRMONT Installations India 
Baumüller India Pvt. Ltd. 
271/8, Ingawale Patil Estate 
Pune-Pirangut Road, Bhugaon, 412115 Pune 
T: +91 20 40160333/300

Iran

Baumüller Representation Iran 
Western Unit, 2nd Floor, Building No. 1, Barmak 
Aley, Alvand Street, Argentine Sq. 
1516639415 Tehran 
T: +98 21 8867 0813, F: +98 21 8878 5342

Israel 

SERVI-TECH LTD. 
48d HaHaroshet St. Building 34/10 
P.O.B 6371, Ind. Zone Carmiel 20651 
T: +972-4-9589550, F: +972-4-9589551

Italy

Baumüller Italia S.r.l. 
Viale Italia 12, 20094 Corsico (Mi) 
T: +39 02 45100 - 181, F: +39 02 45100 - 426

Mexico

 

Baumueller Nuermont S.A. de C.V. 
Carretera Estatal 431 km 2+200, Lote 95 Módulo 11 
Parque Industrial Tecnológico Innovación 
CP 76246 El Marqués, Querétaro Mexico 
T: +52 (442) 221 6670

Netherlands

Baumüller Benelux B.V. 
Regenbeemd 6, 4825 AT Breda  
T: +31 (0) 76 5717111, F: +31 (0) 76 5871211

Poland

Mekelburger Polska 
Ul. Kóscielna 39 F/3, 60537 Poznán 
T: +48  601 87 87 03, F: +48 (0) 61 8481 520

Poland

 

KF Domena Sp. z o.o. 
Ul. Hutnicza 3, 40-241 Katowice 
T/F: +48 32 299 04 83

Russia

ProSensor 
Zavodskaya Street 1B building 2 
124365 Moscow, Zelenograd 
T: +7  495 6428 476, F: +7 495 6428 477

Slovenia, Croatia

Baumüller Dravinja d.o.o. 
Delavska cesta 10, 3210 Slovenske-Konjice 
T: +386 3 75723 - 00, F: +386 3 75723 - 32/33

South Africa

Motion Tronic cc 
Unit 15, Nutwood Industrial Park 
144 Brackenhill Road, 3652 Waterfall 
T: +27 31 7011620, F: +27 86 6150597

South Korea  

Bomac Systems 
417 Yucheon Factophia, 196 Anyang-7 dong, 
Mananku, Anyangsi, Kyungkido 430-017  
T: +82 31 467 - 2030, F: +82 31 467 - 2033

South Korea

 

BMK Co., Ltd 
Ssangyoung 3th, 397 Seokcheon-Ro, Ojeong-Gu,  
Bucheon-Si,  Gyeonggi-Do, Korea 
T: +82 32 624-3073, F: +82 32 624-3074

Spain

Baumüller Ibérica S.L.  
Cañada de Recueros 20A, 28946 Fuenlabrada 
T: +34 91 685 66 55, F: +34 91 600 08 64

Switzerland

Baumüller Swiss AG 
Oberwiesenstrasse 75, 8500 Frauenfeld 
T:  +41 (0) 52  723  28 - 00,  F:  +41 (0) 52  723  28 - 01

Thailand

Mr. Tom Sale and Service Co., Ltd. 
39/9 Moo 1, Tepkanjana Rd., Tambol Nadee 
Amphur Muang, 74000 Samutsakorn  
T: +66  34 854932-4, F: +66 34 854935

Turkey

Baumüller Motor Kontrol Sistem San. ve Tic. Ltd. Sti. 
Girne Mah., Kücükyali Is Merkezi, B Blok No. 12 
Maltepe,  34852  Maltepe – Istanbul   
T: +90 216 519 - 9071, F: +90 216 519 - 9072

USA

Baumueller-Nuermont Corp. 
1858 S. Elmhurst Road, Mount Prospect, IL 60056 
T: +1 847 956-7392, F: +1 847 956-7925

USA

Baumueller-Nuermont Corp. 
1555 Oakbrook Drive Suite 120, Norcross, GA 30093  
T: +1 678 291-0535, F: +1 678 291-0537

Venezuela, Colombia, Ecuador

Nimbus International – 6941 SW 196th Ave, 
Ste. 22, Pembroke Pines, FL 33332, USA 
T: +1 954 252 9242; F: +1 954 252 5372

Subsidiaries

Summary of Contents for DSC1-045-100 Series





















































































































Reviews: