Baumuller BUS 6 VC, Manual

Page: 11 / 110

Technical Data
V-Controller (BUS 6 VC)
9
Baumüller Nürnberg Electronic GmbH & Co. KG
5.03047.01
2 T
ECHNICAL
D
ATA
2.1 General
This variant of the V-Controller is designed for the fully digital control of the Baumüller feed/feed back
units BUC63 and BUC64. With this V-controller the intermediate circuit direct voltage Uzk is held on a
constant value.
All other known V-Controller variants are designed for speed control of AC motors.
Closed-Loop Control Functions
!
U
zk
control at 62,5 µs
!
Current control at 62,5 µs
– The controller is operated by digital inputs. Via the serial interface RS232 serial port and a PC
the parameterization, commissioning and service as well as archiving control parameter to floppy
disk can be done.
Inputs/outputs
!
Digital inputs (24 V):
–
Pulse enabling
– 4 programmable function inputs
!
Analog inputs:
–
2 analog inputs (0 ... ±10 V), 12 bit resolution
!
Serial interfaces:
–
RS232 with a transmission rate of 9600 baud, optical separated
!
Digital outputs:
–
1 relay contact message „ready for use“
– 1 programmable function outputs
!
Analog outputs
–
2 analog outputs (0 ... ±10 V), 12 bit resolution
Operation Software
!
Up-/Download with PCBASS (see, Technical Description No. 5.96079)
!
PCBASS (see, Technical Description No. 5.94004)