Baumuller BM5-O-SAF-002, Operation Manual, Page: 120 / 182

Requirements on the personnel conducting the work
Operation Manual Safety Module for b maXX 5000 BM5-O-SAF-002/3
Document no.: 5.11016.03 Baumüller Nürnberg GmbH
120
of 180
15.2
15.2 Requirements on the personnel conducting the work
DANGER!
Perilous danger from electrical current!
The device and surrounding area in the electrical cabinet can carry perilous voltages.
Therefore:
m
The danger- and warning notes must be observed (see chapter
Z
4.8
–
on page
21).
m
Ensure, that only qualified personnel mounts and installs this module (see
requirements in chapter
Z
4.6
–
on page 19 "Personnel training").
15.3 Assembly instructions
The assembly of the controller is described in the operation manual for the controller.
DANGER!
Perilous danger from electrical current!
The device and surrounding area in the electrical cabinet can carry perilous voltages.
Therefore:
m
The described danger- and warning notes must be observed (see chapter
Z
4.8
–
on page 21.
The following tools are required:
m
Torx screwdriver (size TX8) for fastening the Safety Module in the controller.
h
Ensure that the suitable controller is available (see chapter
Z
Compatibility list
–
on
page 31).
Perform the assembly as follows:
1 Plug the Safety Module into the mounting opening of the frequency controller.
2 Secure the module with the torx screw against unintentional dropping.