Description of the Software Modules and Parameters
Parameter manual
b maXX
BM5800
Document No.: 5.16029.03
703
3
3.11.1.2 Description of the Parameter
143.8
Field angle speed threshold
Speed threshold from which field angle monitoring becomes active. Field angle monitor-
ing is not carried out below the threshold.
Value 0 will completely switch off field angle monitoring.
143.9
Field angle counter
Shows the current status of the field angle error counter.
The field angle error is determined in the current controller cycle.
The message "Error While Monitoring the Field Angle" must recognize a field angle error
not less than in every other current controller cycle between two monitoring (1 ms) cycles.
