Baumuller b maXX 4100 Series, Operation Manual

Page: 84 / 144

Monitoring
Operation manual b maXX BM4100 (NWR)
Document no.: 5.04052.09 Baumüller Nürnberg GmbH
84
of 142
8.5
8.5 Monitoring
The controller unit monitors the device during the operation. If the controller unit recog-
nizes a status, which deviates from normal operation, the device either issues a warning
or an error message.
Warning If the controller unit recognizes an operating condition, which is close to an error condi-
tion, an accordant warning message is shown in ProDrive and by the control respectively.
The most important warning (current limit reached) the device also shows via the LED H3
(see
Z
Current limit (H3)
–
on page 44).
Error message The controller unit recognizes, that the device is not error-free, this is shown via the LED
H4 (see
Z
Error (H4)
–
on page 44) and via the 7-segment-display. Furthermore an ac-
cording error text is shown from ProDrive or the control can read out an error code from
the device.
Further information is to be found in chapter (
Z
Troubleshooting and fault correction
–
from
page 85).