Baumuller B MaXX 4000 Series, Instruction Handbook Manual

Page: 43 / 76

43
of 74
Instruction handbook b maXX (BM4-F-)DIO/FIO-XX (Digital IO module)
Document No. 5.01046.06
8
C
OMMISSIONING
/O
PERATION
This commissioning assures, that the DIO/FIO-XX or BM4-F-DIO/FIO-XX has been cor-
rectly recognized. Further information relating to commissioning and parameter settings
of the encoder module can be found in parameter manual
b maXX 4000 5.03039.
Assure, that before commissioning the following preconditions are fulfilled:
1 The BM4-F-DIO/FIO-XX is correctly mounted (standard controller only).
2 DIO/FIO-XX or BM4-F-DIO/FIO-XX is correctly installed
m
The digital inputs and outputs must be correctly cabled.
m
The connection must be suitable to the electrical specification of the DIO/FIO-XX or
BM4-F-DIO/FIO-XX .
3 The switching cabinet is properly closed and all safety devices are put into operation
4 The b maXX 4000 is ready-for-use.
8.1 Safety notes
Basics
WARNING!
Risk of injury due to improper operation!
Improper operation can lead to severe personal injury or material damage.
Therefore:
m
Perform all operational steps according to the details of these instruction hand-
book.
m
Before beginning any work, ensure that all coverings and protective devices are
installed and are functioning properly.
m
The control cabinet in which the device is installed should be protected against
contact with electrically live parts.
Keep all doors of the control cabinet closed during operation.