Baumuller b maXX 1000, Parameter Manual

Page: 100 / 210

Parameter description
Parameter manual b maXX
®
1000
Document no. 5.07004.03 Baumüller Nürnberg GmbH
100
of 208
4.3
P1140
The parameter are used to set the analog input reference values. The min and max fre-
quencies are based on
Z
P0033
–
(during open-loop control) as shown in the following.
Figure 48: Analog input reference values 3
Example see
Z
Figure 44
–
and
Z
Figure 45
–
on page 95.
P1141
The parameter are used to set the analog input reference values and is based on percent-
age of
Z
P0033
–
). For further information see
Z
P1139
–
and
Z
Figure 48
–
on page 100.
P1142
For further information see
Z
P1139
–
and
Z
Figure 48
–
on page 100.
P1143
For further information see
Z
P1139
–
and
Z
Figure 48
–
on page 100.
P1140 Minimale AVI3 Spannung 0.0 to 10.0 V
EE Minimum AVI3 voltage 0.1 V
STOP BM_u_MinimumAVI3Voltage 10:1
P1141
Minimale AVI3 Frequenz 0.0 to 100.0 %
EE Minimum AVI3 frequency 0.0 %
STOP BM_u_MinimumAVI3Frequency 10:1
P1142 Maximale AVI3 Spannung 0.0 to 10.0 V
EE Maximum AVI3 voltage 0.1 V
STOP BM_u_MaximumAVI3Voltage 10:1
P1143
Maximale AVI3 Frequenz 0.0 to 100.0 %
EE Maximum AVI3 frequency 0.0 %
STOP BM_u_MaximumAVI3Frequency 10:1