Baumer
GenICam Camera Features
|
8
V1.0 | AX Smart Cameras
Operating Manual
123
8.13
Category: Memory Management
Category to support the cameras buffer management in memory.
8.13.1
MemoryMaxBlocks
Maximum count of disposal memory blocks.
Name
MemoryMaxBlocks
Category
MemoryManagement
Interface
IInteger
Access
Read only
Unit
-
Values
0 ... 4294967295 (Increment: 1)
8.14
Category: SequencerControl
Category for the Sequencer Control features.
The Sequencer enables the possibility of image series recording including automated re-param-
eterization of the camera based on different events and signals. Therefore the desired camera
settings for each step are stored in so called sequencer sets.
Stringing together a number of these sequencer sets results in a sequence. The connection of
sequences is done by using different paths. Alongside the camera features the path related fea-
tures are also part of a sequencer set.
Sequencer sets
Sequencer sets combine camera features – comparable with a user set – and sequencer (set
and path) related parameters.
Settings for several camera features such as:
n
Exposure time
n
Gain
n
Region of Interest (
OffsetX
/
OffsetY
/
Width
/
Height
)
n
User output
n
Counter
can be controlled by the sequencer and thus stored to a sequencer set as well as information
for the set switch-over via four different paths.
