Baumer SensControl, Operating Manual

Page: 12 / 24

4 | Operation Baumer
12 Operating Manual SensControl | V1
4.4 Operating the SensControl in sniffing mode
NOTICE
The SensControl app cannot be used in sniffing mode .
In sniffing mode, the SensControl tracks the communication between an IO-Link master and an
IO-Link device without affecting the existing connection between the IO-Link master and the IO-
Link device.
The setup of the sniffing mode is described exemplarily with the following devices:
n
IO-Link master: Baumer USB IO-Link Master (USB IOLM)
n
IO-Link device: Baumer IR18 distance sensor
Sniffing mode is set up with other devices analogously.
Set up sniffing mode in the following order:
1. Connect the SensControl .
2. Activate sniffing mode.
Afterwards, you can read out the MicroSD card to view the data.
Also see about this
2
Connecting the SensControl (sniffing mode) [
}
12]
2
Activating sniffing mode [
}
13]
2
Reading the MicroSD card [
}
13]
4.4.1 Connecting the SensControl (sniffing mode)
1 2
3
1 Anschluss für IO-Link Master 2 Anschluss für IO-Link Device
3 Slot für MicroSD-Karte
Instruction:
a) Connect the USB IOLM to the SensControl (connection for IO-Link master).
b) Connect the sensor to the SensControl (connection for IO-Link device).
c) Insert a MicroSD card into the SensControl (slot for MicroSD card). The MicroSD card must
be FAT32-formatted.