Baumer PF55S Operation Manual Download Page 42

Page: 42 / 105

Make sure you have a Type A to B USB cable available for

connection.

Connect Port A of the USB cable to a free USB port on the

PC.

Unscrew the cover at the top of the transmitter of the flow

sensor.

The USB Port B of the flow sensor is freely accessible.

Connect Port B of the USB cable to the USB port of the flow

sensor.

The flow sensor is connected to the PC via USB.

The BCP software can be installed on the PC with all

drivers.

6.2 “BCP software installation” on page 42

The flow sensor can be configured.

7.1 “BCP Software” on page 47

6.2 BCP software installation

Personnel:

Operator

The flow sensor must be connected to a PC via the USB port.

The PC must have a functioning Internet connection to install the

BCP software with all drivers.

6.1 “Create USB interface” on page 41

NOTICE!
Faulty installation possible due to firewall or virus

protection program

The BCP software can be incorrectly recognized or

blocked by the firewall or the virus protection program

as malware.

In this case, the

BCP.exe

file must be released man-

ually in the firewall or the virus protection program.

Commissioning

BCP software installation

05.03.2020

Flow sensor PF55S

Summary of Contents for PF55S










































































































Search results

Summary of Contents for PF55S

Reviews:

Brands by name

Popular brands

Baumer PF55S, Operation Manual

Search results

Summary of Contents for PF55S

Reviews:

Brands by name

Popular brands