NE212
48
www.baumer.com
Rapid preset value input with F-key
If frequent changes to a certain preset value are required by the
user, the
-key can be used.
When the key
is operated, the LED symbol display transfers di-
rect to the desired preset value (selection is effected in programming
line 35), and the new preset value can be input immediately via the
numerical keypad, thereby automatically deleting the old value. To
confirm the new value, press the key
again.
Procedure
1. Press key
2. Input preset value
3. Press key
5 Programming mode
Operating parameters are set in the programming mode, which is
subdivided into four programming segments.
Programming field 1
In the first programming field, all the operating parameters can
be accessed and changed. The operating parameters which are
disabled in the operating mode are also displayed here. The first
programming segment consists of 8 lines.
Programming field 2
In the second programming field, the individual operating parameters
for access to the operating mode can be disabled and
enabled. In the first programming segment, access is possible to
these disabled operating parameters.
Programming field 3
In the third programming field, all the machine-related functions
and values can be programmed.
Programming field 4
In the fourth programming field, the interface parameters can be
programmed.
Key functions
The same key assignments apply to the individual programming seg-
ments. Since key functions may vary in the operating and program-
ming modes, however, all the functions are described in full below.
Key
Transfer to the next operating parameters in the operating and
programming modes. For a fast run-through, hold the key down.
Key
Transfer from programming to operating mode and vice versa.