MOUNTING
MB245EN - 11171693, 17A2, Baumer_PMG10-SSI_II_EN
12/33
4.4
Note when using a jaw-type coupling (for example „ROTEX®“)
)
Incorrect mounting of the jaw-type coupling can damage the encoder�
Avoid blocking of both coupling halves (claws pressed together)� The encoder shaft
must not subjected to direct axial shock�
» Use a depth gauge to find and observe the correct distances (
L
,
L1
) for the versi-
on with EURO flange B10, see below.
» For the version with housing foot B3 observe the distance
L1
�
L
+
L1
L
L1
1-2 mm
