MB021 - 11055625
Baumer_GT5_II_DE-EN (19A1)
6
Vorbereitung - Montage
/ Preparation - Mounting
3-4
3.2
Zur Montage erforderlich
(nicht im Lieferumfang enthalten)
3.2
Required for mounting
(not included in scope of delivery)
12
Befestigungsschraube M3x20 mm, ISO 7045
13
Montagekegel (empfohlen), als Zubehör er-
hältlich: Bestellnummer 11056794
12
Fixing screw M3x20 mm, ISO 7045
13
Mounting cone, recommended, available as
accessory: Order number 11056794
12
2x
13
3.3
Erforderliches Werkzeug
(nicht im Lieferumfang enthalten)
3.3
Required tools
(not included in scope of delivery)
4
Montage
4.1
Schritt 1
4
Mounting
4.1
Step 1
Zul. Anzugsmoment:
Max. tightening torque:
M
t
= 3 Nm
4
*
*
*
*
5
6
7
Antriebswelle einfetten.
Lubricate drive shaft.
Die Montage an den Antrieb muss mit
möglichst geringem Winkelfehler und
Parallelversatz erfolgen.
The device must be mounted on the
drive with the least possible angular
error and parallel misalignment.
* Siehe Seite 5
See page 5
PH 1 bei Verwendung von
12
15 mm bei Version IP54
TX 6, TX 20
14
Werkzeugset als Zubehör erhältlich:
Bestellnummer 11068265
PH 1 at use of
12
15 mm for version IP54
TX 6, TX 20
14
Tool kit available as accessory:
Order number 11068265
TX 20