Baumer hhs ULT 400 XL, Operation Manual, Page: 41 / 53

8 Maintenance
DANGER!
Risk of injury when entering the operating space of
the super-ordinate machine and its moving parts
8.1 Maintenance table
Interval Maintenance work Personnel
weekly ULT 400 XL:
Clean windows and protective glass for infrared measurement technology with
a soft cloth.
Ä “Cleaning” on page 41
Operator
8.2 Maintenance work ULT 400 XL
8.2.1 Sensor ULT 400 XL
NOTICE!
Damage due to removal of sensor under voltage
Removing the sensor from the system control cabinet
under voltage may damage the electronics or cause a
data loss.
– Only remove the sensor from the system control
cabinet when the cabinet is switched off.
– Only remove the sensor from the system control
cabinet when the cabinet is switched off.
The sensor does not require maintenance.
No special maintenance activities are required.
Regular cleaning and regular review of the plug connections are
recommended.
During cleaning of the sensor, care must be taken to ensure that
the cleaning agent used does not come into contact with the
housing surface and seals.
The window with protective glass should only be cleaned with a
soft cloth.
Cleaning
Maintenance
Maintenance work ULT 400 XL > Sensor ULT 400 XL
04.05.2021 ULT 400 XL 41