Baumatic Pythagora PI3SS, Instruction Manual, Page: 21 / 28

o
Raise the upper chimney section to the framework again and
retighten the 4 M4 screws. At this stage, they still should not be
fully tightened.
12) There are two decorative side pieces (H) that should be used
to cover the grooves in the inner chimney section.
o
Use an appropriate tool to cut the decorative side pieces to your
required length. The length of the side pieces will be governed
by how high you need to raise the inner chimney section.
o
Slide the decorative side pieces into the grooves on each side of
the inner chimney section.
o
Bend down the hooks at the top of the decorative side pieces so
that they sit over the top of each groove.
13) You should fully tighten the 4 M4 metric screws at this stage.
21